PRODUCT DESCRIPTION
CHEMTOP 1002 is a solvent-free epoxy based, low viscosity primer and impregnation product. It is used as a primer and/or correction layer before polyurethane and epoxy based coatings.
It has high mechanical and chemical resistance after completing its cure. It has excellent adhesion to ground prepared concrete and concrete screed surfaces.
It is also used to strengthen concrete surfaces with weak adhesion and dust, and to protect them against abrasion and chemicals. In addition, the mortar prepared by mixing the product with epoxy sand is used in the repair of fractures and cracks on concrete surfaces.
APPLICATION AREAS
- As a primer to prepare the surface before epoxy, bitumen and polyurethane coatings (including KUARS CHEMPROOF MY)
- To protect concrete surfaces against abrasion, dust and chemicals by impregnating them
- Used in the production of repair and putty mortars by mixing with suitable filler.
MIXING RATIO
Mixture Amount % Weight: A / B : 2 / 1
CONSUMPTION
CHEMTOP 1002 (as primer): 0.30 – 0.50 kg / m2
PACKAGING
CHEMTOP 1002 Component A: 12 kg
CHEMTOP 1002 Component B: 6 kg
STORAGE
Store in a dry environment and at room temperature, unopened in its original packaging. Do not leave in the sun and protect from frost. It has a shelf life of 12 months.
Our Quality, Environmental, and Occupational Health & Safety management systems are ISO 9001/14001 and OHSAS 18001 certified.
SAFETY RECOMMENDATIONS
Preventive measures typically taken for handling chemical products should also be observed when using this product. Hands should be thoroughly washed with plenty of water during breaks or after completing the work. Eating, drinking, and smoking should be avoided. Specific safety information regarding the use and transportation of this product can be found in the Material Safety Data Sheet. For complete details on health and safety matters related to this product, please refer to the relevant Health and Safety Information Document. The disposal of this product and its container must be carried out in accordance with applicable local regulations, and the responsibility for this rests with the end user.
LEGAL DISCLAIMER
The data provided in this technical document is based on our scientific and practical knowledge. Kuars Kimya Sanayi ve Tic. Ltd. Şti. is only responsible for the quality of the product. Kuars Kimya Sanayi ve Tic. Ltd. Şti. cannot be held liable for any outcomes resulting from improper use and/or uses beyond the written recommendations provided for where and how the product should be applied. This technical document is valid until a new version is published, and previous versions are rendered invalid.