CHEMPROOF SB
UV Resistant Insulation Material Consisting of Special Mineral Fillers and Polymer Components
PRODUCT DESCRIPTION
CHEMPROOF SB is a highly abrasion resistant waterproofing coating material consisting of special mineral fillers and polymer components, with strong adhesion ability, excellent water resistance and high UV resistance.
APPLICATION AREAS
- In interior and exterior spaces, in vertical and horizontal applications, from the direction of water,
- In concrete terrace and roof insulation,
- On bituminous, slate and colored sand roof membranes,
- On Betopan, eternit, mdf and osb surfaces,
- In wet area insulation, provided that ceramic is coated on it,
- In concrete roads, parks and gardens, asphalt surfaces,
- In hidden streams, gutters and eaves.
- In renewing the waterproofing of bituminous or similar surfaces,
- Water insulation is applied to ceramic coated surfaces using CHEMTOP 2001 primer. (ON CONDITION THAT CERAMIC COATING IS MADE AGAIN)
ADVANTAGES
- Easy to apply,
- Bridging shrinkage cracks with its elastomeric structure,
- Freeze-thaw resistance,
- Resistant to aging, water, various salt solutions and weak acids,
- Used in areas affected by movement and vibration,
- High adhesion and elastic film formation,
- High UV and abrasion resistance,
- Economical and long-lasting,
- Environmentally friendly, does not harm human health.
- Should not be applied on wet and frozen surfaces and in cases where there is a possibility of precipitation.
CONSUMPTION
CHEMPROOF SB : 1.0-1.5 kg / m2 (Two coat application)
PACKAGING
18 kg Metal Tin
STORAGE
Can be stored in unopened original buckets, in dry environments at temperatures between 15°C and 25°C for a minimum of 12 months. The material in the opened bucket should be used as soon as possible.
Our Quality, Environmental, and Occupational Health & Safety management systems are ISO 9001/14001 and OHSAS 18001 certified.
SAFETY RECOMMENDATIONS
Preventive measures typically taken for handling chemical products should also be observed when using this product. Hands should be thoroughly washed with plenty of water during breaks or after completing the work. Eating, drinking, and smoking should be avoided. Specific safety information regarding the use and transportation of this product can be found in the Material Safety Data Sheet. For complete details on health and safety matters related to this product, please refer to the relevant Health and Safety Information Document. The disposal of this product and its container must be carried out in accordance with applicable local regulations, and the responsibility for this rests with the end user.
LEGAL DISCLAIMER
The data provided in this technical document is based on our scientific and practical knowledge. Kuars Kimya Sanayi ve Tic. Ltd. Şti. is only responsible for the quality of the product. Kuars Kimya Sanayi ve Tic. Ltd. Şti. cannot be held liable for any outcomes resulting from improper use and/or uses beyond the written recommendations provided for where and how the product should be applied. This technical document is valid until a new version is published, and previous versions are rendered invalid.