PRODUCT DESCRIPTION
CHEMPROOF MY is a polyurethane based, single component, low viscosity, liquid primer material that cures with the humidity in the air. It dries rapidly on the surfaces it is applied to and forms a seamless, watertight and high strength waterproofing coating. The coating formed has high UV resistance, a wide service temperature range (between -30OC and +80OC) and permanent elasticity. After completing its reaction, it is resistant to water, salt water, salt solutions, bases, diluted acids and detergents.
APPLICATION AREAS
- Plaster and cement panels
- Bathrooms
- Verandas and balconies
- Roofs
- Light roofs made of metal or fiber cement
- Asphalt membranes
- EPDM membranes
- Stadium stands
- Car parks
- Bridge platforms
- Applied to irrigation channels.
ADVANTAGES
- Resistant to pedestrian traffic
- Resistant to UV rays
- Resistant to outdoor weather conditions
- Creates a seamless and jointless coating
- Elastic up to -300C
- Single component, extremely easy to apply and repair
- Resistant to constant water and snow contact
- Resistant to wear and tear.
CONSUMPTION
CHEMPROOF MY: 1.50-2.00 kg/m2.
PACKAGING
20 lt Tin Packaging
STORAGE
Can be stored for a minimum of 6 months in unopened original buckets, in dry environments at temperatures between 15°C and 25°C. Material in opened buckets should be used as soon as possible.
Our Quality, Environmental, and Occupational Health & Safety management systems are ISO 9001/14001 and OHSAS 18001 certified.
SAFETY RECOMMENDATIONS
Preventive measures typically taken for handling chemical products should also be observed when using this product. Hands should be thoroughly washed with plenty of water during breaks or after completing the work. Eating, drinking, and smoking should be avoided. Specific safety information regarding the use and transportation of this product can be found in the Material Safety Data Sheet. For complete details on health and safety matters related to this product, please refer to the relevant Health and Safety Information Document. The disposal of this product and its container must be carried out in accordance with applicable local regulations, and the responsibility for this rests with the end user.
LEGAL DISCLAIMER
The data provided in this technical document is based on our scientific and practical knowledge. Kuars Kimya Sanayi ve Tic. Ltd. Şti. is only responsible for the quality of the product. Kuars Kimya Sanayi ve Tic. Ltd. Şti. cannot be held liable for any outcomes resulting from improper use and/or uses beyond the written recommendations provided for where and how the product should be applied. This technical document is valid until a new version is published, and previous versions are rendered invalid.