CHEMPAINT ALS 5012
Two Component, Polymer Modified, Water Based Aliphatic Topcoat Paint
PRODUCT DESCRIPTION
CHEMPROOF ALS is a two-component, polymer modified, water-based ceramic, granite, marble, paledian, epoxy, polyurea, metal, concrete, asphalt, printed concrete etc. non-slip, protective film-forming top coat paint specially developed for surfaces. It dries quickly on the surfaces it is applied to and forms a seamless, waterproof and high-strength floor covering. It is resistant to sunlight and does not fade or darken over time. The resulting coating has high UV resistance, a wide service temperature range (between -400C and +800C) and high elasticity.
ADVANTAGES
- Easy to apply.
- Completely resistant to outdoor conditions.
- Unaffected by UV rays.
- Protects the applied surface against water, rain and sunlight, prevents abrasion.
- Easy to clean, dries quickly, does not cause dust.
- It is long-lasting, does not lose its flexibility, does not change color
- It has high scratch and abrasion resistance
- It is semi-elastic.
- It has high abrasion and chemical resistance.
- It is easy to apply
- It does not harbor bacteria
- It does not dust.
APPLICATION AREAS
- Sports fields,
- Metal and wooden surfaces,
- Swimming pools, ornamental pools, irrigation pools,
- Sandwich panel sheet metal roof sheets, corrugated or flat roof coverings,
- Floors open to pedestrian and vehicle traffic,
- Areas where floor protection and coloring is required in all kinds of ceramic, marble, metal, epoxy, paledian, granite, concrete, asphalt etc. floors in open and closed areas.
CONSUMPTION
CHEMPAINT ALS 5012: 0.200-0.400 kg/m2.
MIXING RATIO
Mixing Amount % Weight: A / B: 10 / 1
PACKAGING
CHEMPAINT ALS 5012 A Component: 15 kg
CHEMPAINT ALS 5012 B Component: 1.5 kg
STORAGE
Can be stored in unopened original buckets, in dry environments at temperatures between 15°C and 25°C for a minimum of 6 months. Material in opened buckets should be used as soon as possible.
Our Quality, Environmental, and Occupational Health & Safety management systems are ISO 9001/14001 and OHSAS 18001 certified.
SAFETY RECOMMENDATIONS
Preventive measures typically taken for handling chemical products should also be observed when using this product. Hands should be thoroughly washed with plenty of water during breaks or after completing the work. Eating, drinking, and smoking should be avoided. Specific safety information regarding the use and transportation of this product can be found in the Material Safety Data Sheet. For complete details on health and safety matters related to this product, please refer to the relevant Health and Safety Information Document. The disposal of this product and its container must be carried out in accordance with applicable local regulations, and the responsibility for this rests with the end user.
LEGAL DISCLAIMER
The data provided in this technical document is based on our scientific and practical knowledge. Kuars Kimya Sanayi ve Tic. Ltd. Şti. is only responsible for the quality of the product. Kuars Kimya Sanayi ve Tic. Ltd. Şti. cannot be held liable for any outcomes resulting from improper use and/or uses beyond the written recommendations provided for where and how the product should be applied. This technical document is valid until a new version is published, and previous versions are rendered invalid.