CHEMPAINT 3002
Single Component, Acrylic Based, Polished Concrete and Asphalt Floor Paint
PRODUCT DESCRIPTION
CHEMPAINT 3002 is a single component, acrylic based coloring and protection paint designed for fast drying and hardening floors.
Due to its high durability, it maintains its adhesion strength and film thickness for a long time under heavy traffic.
Its UV resistance and chemical resistance are very high.
Since it dries and hardens quickly, the applied area is opened to traffic within 1-2 hours. It is used to provide adhesion in drawing and marking the area on concrete floors.
Its physical and chemical resistance is very high compared to alkyd based paints. Therefore, it is preferred as a new generation top coat paint in concrete floor applications thanks to these features in single compound paint applications.
It can be easily applied with a roller, brush or spray gun.
APPLICATION AREAS
- In warehouse, factory and logistics areas
- Asphalt, concrete, screed, helicopter concrete, paving stone, natural stone, brick stone, etc. on floors
- It can be applied on factory floors, open and closed parking lots or terraces of residences, workplaces and shopping malls.
ADVANTAGES
- Its viscosity is very low.
- It impregnates very well.
- It is single component; easy to use.
- It is resistant to sunlight.
- It is solvent based.
- It does not cause slipping or dusting on the applied surface.
- It is not affected by weather conditions. (-5, 40°C)
- Its application is fast and easy.
- It fills non-structural capillary cracks by reducing the water absorbency of the concrete structure.
- It provides two-stage protection since it provides permanent water impermeability on the surface.
- It creates an impermeable surface by filling the pores on gas concrete and similar surfaces.
CONSUMPTION
CHEMPAINT 3002: 0.350-0.700 kg/m2. (Max. 0.700 kg/m2 in two layer application)
PACKAGING
20 kg Metal Tin
STORAGE
Can be stored for a minimum of 12 months in unopened original buckets, in dry environments at temperatures between 15°C and 25°C. The material in the opened bucket should be used as soon as possible.
Our Quality, Environmental, and Occupational Health & Safety management systems are ISO 9001/14001 and OHSAS 18001 certified.
SAFETY RECOMMENDATIONS
Preventive measures typically taken for handling chemical products should also be observed when using this product. Hands should be thoroughly washed with plenty of water during breaks or after completing the work. Eating, drinking, and smoking should be avoided. Specific safety information regarding the use and transportation of this product can be found in the Material Safety Data Sheet. For complete details on health and safety matters related to this product, please refer to the relevant Health and Safety Information Document. The disposal of this product and its container must be carried out in accordance with applicable local regulations, and the responsibility for this rests with the end user.
LEGAL DISCLAIMER
The data provided in this technical document is based on our scientific and practical knowledge. Kuars Kimya Sanayi ve Tic. Ltd. Şti. is only responsible for the quality of the product. Kuars Kimya Sanayi ve Tic. Ltd. Şti. cannot be held liable for any outcomes resulting from improper use and/or uses beyond the written recommendations provided for where and how the product should be applied. This technical document is valid until a new version is published, and previous versions are rendered invalid.