CHEMBITUMEN IZO 2K
Two-Component, Bitumen-Rubber Based Polymer Modified Waterproofing Material
PRODUCT DESCRIPTION
CHEMBITUMEN IZO 2K is a rubber-bitumen based, polymer modified waterproofing product. It is two-component and consists of a liquid component – bitumen emulsion and a powder component – cement-based powder component enriched with chemical additives. It can be used in the insulation of balconies and terraces, as well as foundation bundling and curtain wall insulation of buildings. It is applied to mineral-based surfaces such as concrete, screed, plaster and mortar.
APPLICATION AREAS
- Waterproofing of building foundations,
- Insulation of curtain walls and retaining walls,
- Waterproofing of underground parking lot floors,
- Waterproofing of wet areas
- Repair of old bituminous membrane, bitumen, asphalt, bituminous paper, etc. insulations,
- Used horizontally and vertically, above and below ground.
ADVANTAGES
- Can be applied with a brush or airless spray gun.
- Does not sag on vertical surfaces.
- Maintains its elasticity even at low temperatures.
- Can be applied on all mineral surfaces such as concrete, stone, brick, briquette.
- Provides jointless, seamless waterproofing against all kinds of water and moisture effects.
- Does not contain solvent, does not shine/does not catch fire.
- Can be applied on dry and slightly damp surfaces.
- Can form a crack bridge.
MIXING RATIO
Mixture Amount % Weight: A / B: 3 / 1
CONSUMPTION
CHEMBITUMEN IZO 2K :2.0-3.0 kg/m3
PACKAGING
CHEMBITUMEN IZO 2K A Liquid Component: 24 kg
CHEMBITUMEN IZO 2K B Powder Component: 8 kg
STORAGE
Can be stored for a minimum of 12 months in unopened original buckets in dry environments at temperatures between 15°C and 25°C. The material in the opened bucket should be used as soon as possible.
Our Quality, Environmental, and Occupational Health & Safety management systems are ISO 9001/14001 and OHSAS 18001 certified.
SAFETY RECOMMENDATIONS
Preventive measures typically taken for handling chemical products should also be observed when using this product. Hands should be thoroughly washed with plenty of water during breaks or after completing the work. Eating, drinking, and smoking should be avoided. Specific safety information regarding the use and transportation of this product can be found in the Material Safety Data Sheet. For complete details on health and safety matters related to this product, please refer to the relevant Health and Safety Information Document. The disposal of this product and its container must be carried out in accordance with applicable local regulations, and the responsibility for this rests with the end user.
LEGAL DISCLAIMER
The data provided in this technical document is based on our scientific and practical knowledge. Kuars Kimya Sanayi ve Tic. Ltd. Şti. is only responsible for the quality of the product. Kuars Kimya Sanayi ve Tic. Ltd. Şti. cannot be held liable for any outcomes resulting from improper use and/or uses beyond the written recommendations provided for where and how the product should be applied. This technical document is valid until a new version is published, and previous versions are rendered invalid.