PRODUCT DESCRIPTION
CHEMFOAM IN4 is a single component polyurethane based hydrophobic injection resin that reacts with water to form an elastic mortar with a plug function. It has been developed for sealing cracks and joints on surfaces and for waterproofing. It effectively stops water leaks or leaks. It is recommended to be used on concrete elements where structural movements are present. It is applied with a single component injection pump.
ADVANTAGES
- It exhibits effective performance in sealing cracks and gaps in concrete, especially joints.
- It has low viscosity. It penetrates deeply with minimum pressure.
- It is an elastic and completely hydrophobic foam.
APPLICATION AREAS
- Foundations
- Underground structures such as garages
- Tunnels and underground passages
- Waste water, sewage systems
- Warehouses
- Waterways and dams
CONSUMPTION
Approximately 0.1-0.15 kg of mixture for each liter of space
MIXING RATIO
Mixture Amount % By Weight: A / Catalyst: 20/ 1.3
PACKAGING
CHEMFOAM IN4 :20 kg
CATALYSTOR: 1.3 kg
STORAGE
Store in a dry environment and at +150 C, unopened in its original packaging. Protect from frost. Shelf life is 6 months.
Our Quality, Environmental, and Occupational Health & Safety management systems are ISO 9001/14001 and OHSAS 18001 certified.
SAFETY RECOMMENDATIONS
Preventive measures typically taken for handling chemical products should also be observed when using this product. Hands should be thoroughly washed with plenty of water during breaks or after completing the work. Eating, drinking, and smoking should be avoided. Specific safety information regarding the use and transportation of this product can be found in the Material Safety Data Sheet. For complete details on health and safety matters related to this product, please refer to the relevant Health and Safety Information Document. The disposal of this product and its container must be carried out in accordance with applicable local regulations, and the responsibility for this rests with the end user.
LEGAL DISCLAIMER
The data provided in this technical document is based on our scientific and practical knowledge. Kuars Kimya Sanayi ve Tic. Ltd. Şti. is only responsible for the quality of the product. Kuars Kimya Sanayi ve Tic. Ltd. Şti. cannot be held liable for any outcomes resulting from improper use and/or uses beyond the written recommendations provided for where and how the product should be applied. This technical document is valid until a new version is published, and previous versions are rendered invalid.